Colorbond fencing in Dubbo

The go-to back and side fence for Dubbo homes. Get a free measure and written quote from an independent local fencer.

A new dark charcoal Colorbond steel fence along the side of a backyard, beside a brick house, with a clothesline and garden hose on the grass
A Colorbond fence in Monument

What Colorbond fencing is

Colorbond fencing is made from pre-painted steel sheets, fixed between steel posts and rails. It's the fence you see along most newer streets in Dubbo, from Keswick to Delroy Park, and it's a common choice when an old paling or fibro fence needs replacing.

It suits most house blocks: back and side boundaries, dividing fences with the neighbours, and screening around sheds, pools and side yards. It gives you privacy, keeps dogs and kids in, and needs very little looking after once it's up.

Why it suits Dubbo

  • Heat and sun: the paint finish is made for Australian conditions, so it doesn't crack, split or need painting like timber does after a few hot summers.
  • No rot or termites: steel posts and sheets don't rot in wet winters and aren't on the menu for termites.
  • Wind and storms: a properly built Colorbond fence, with posts set deep enough in concrete, handles a westerly blow well. If a tree comes down on it, damaged sheets can usually be replaced without rebuilding the whole fence.
  • Clay ground: much of Dubbo is heavy clay that shrinks and swells. A local fencer will set the posts for your ground so the fence stays straight.

Heights, styles and colours

The standard back fence is 1.8 metres high. Lower fences suit front yards and pool areas, and taller panels are available where the rules allow. You can also add a lattice or slat strip along the top for extra height and a softer look.

On sloping blocks, the panels are stepped down the slope, and a plinth (a strip along the bottom) fills the gap so pets can't get under. Matching gates can be built into the same run.

Colours in the fencing range include Monument (dark charcoal), Basalt, Woodland Grey, Shale Grey, Surfmist (off-white), Dune, Paperbark, Riversand and Pale Eucalypt. The range changes from time to time, so ask your fencer for the current colour chart or see the Colorbond fencing website. Darker colours hide dust and marks; lighter colours stay cooler in summer.

Rough cost

As a rough guide, a 1.8 metre Colorbond fence costs about $85 to $150 a metre supplied and installed, based on published NSW price guides in late 2026. A typical Dubbo back yard has 30 to 50 metres of side and back fence, so a full job often lands somewhere between about $2,500 and $7,500. If it's a dividing fence, the neighbours usually share the cost.

Things that push the price up:

  • removing an old fence, especially fibro, which may contain asbestos and has to be handled safely
  • rocky or very hard ground, or a sloping block that needs stepped panels and plinths
  • extra height, lattice or slat toppers
  • gates, and tight access for getting materials in

Your written quote is the real price. The Dubbo fence cost guide goes into more detail.

What happens on the day

  1. The old fence comes down and is taken away, if that's part of the job.
  2. The line of the fence is marked out along the boundary.
  3. Post holes are dug and the posts are set in concrete.
  4. Once the concrete has set, the rails and sheets go in, along with any plinths, toppers and gates.
  5. The site is cleaned up and offcuts taken away.

Let your neighbours know before the job starts, and keep pets inside while the old fence is down.

Common questions

How long does it take to put up?

A straightforward back-yard fence is often finished within a few days, allowing time for the concrete to set. Bigger jobs, removing fibro or rocky ground can take longer. The fencer will give you a time when they quote.

Does my neighbour have to pay half?

Usually, for a standard dividing fence. In NSW, neighbours generally share the cost of a "sufficient" dividing fence equally. If one of you wants something more expensive, that person usually pays the extra. The dividing fences guide explains how it works. This is general information, not legal advice.

Can I use Colorbond for a front fence?

Yes, but front fences are usually kept lower. Under the NSW exempt development rules, a fence along the street front can generally be up to 1.2 metres high without council approval. See the NSW Planning Portal page on fences. Many people choose aluminium slat fencing for the front instead.

Can a Colorbond fence be a pool fence?

A boundary fence can sometimes form part of a pool barrier, but pool barriers have their own rules about height, climbable objects and gates. See the pool fencing page and the NSW Fair Trading pool rules before you plan on it.

How do I look after it?

Hose it down now and then, especially behind garden beds and sprinklers, and keep soil and mulch from piling up against the bottom of the sheets. Don't let garden beds sit right up against the steel.

Is Colorbond better than timber?

It depends what you want. Colorbond needs less upkeep and won't rot or get termites. Timber has a warmer look and is easy to repair a few palings at a time. See the timber fencing page to compare.

COLORBOND® and the colour names above are registered trade marks of BlueScope Steel Limited. Dubbo Fencing isn't connected with BlueScope.

Get a Colorbond fence quote

Call now or send a few details, and a local Dubbo fencer will get back to you to measure up.

Call Free quote